3shape D710 3D Scanner
SKU:
$5,500.00
$5,500.00
per item
3Shape’s D710 series scanners are for medium to large labs where
productivity and flexibility are the key criteria. The Scanner comes
with “Dental System Premium”.
High speed scanning
The D710 is optimized for scanning both impression and gypsum models
and enables high throughput for both standard and advanced
indications.
Its that easy
These advanced dental scanners are so easy to use that extra staff
training is hardly required. Object fixation is quick, and a single
click in the software starts the scan.
Scanning the market’s most extensive range of dental indications
Antagonist model, Pre-preparation
Impression scanning (Add-on Module)
Model builder for impression and intraoral scans (Add-on Module)
Single coping
Bridge framework
Anatomical copings and framework
Full anatomical crown
Full anatomical bridge
Single wax up/ Wax up bridge
Inlay / Onlay / Inlay bridge
Veneers
Over-press crowns and bridges
Post & core
Telescope
Customized abutments (Add-on Module)
Implant bars and bridges
Removable partial design (Add-on Module)
Orthodontics module (Add-on Module)
Multi-Die scanning
Scan Indication Fixtures
3Shape has designed special accessories for your scanners to ensure
fast, problem-free, and precise scans with high quality digital data
for even the most complex indication types.
The impression fixture - Enables automatic alignment of upper and
lower when scanning triple-tray impressions. The impression is fixed
in a permenant position in the flippable holder. The scanner and
software can recreate the precise upper and lower relationship in the
digital model.
The wax-up fixture - enables scanning of wax-ups and bits from all
angles and sides. The wax-up is suspended in wires that will be
invisible in the scan result.
Two-cast fixture - enables users to firmly set 2 models, preparation
and antagonist, in occlusion so they do not move during scanning. The
Two-cast fixture functions like a clamp making it easy to set while
holding the models in occlusion.
Jumpstart the digital design process
Impression scanning, including intra oral, is storming ahead in
today’s dental arena and represents a technology that must be
considered when investing in a new scanner. Gypsym-only scanners may
not represent the most future-secure choice. 3Shape’s 3D scanners can
scan both gypsym models and impressions with fast adaptive impression
scanning, at times below 2 minutes.
Impression scanning reduces turnaround time
Direct scanning of silicone and alginate impressions enables labs to
start CAD design immediately and manufacture model, coping and crown
in parallel.
Enhancing accuracy with direct scanning of impressions
Impression scanning eliminates inaccuracies that can occur when
producing a plaster model from a physical impression.
Impression scan to virtual model
Turn the impression scan to a virtual model by applying tools for
articulation, trimming of scan, base creation, sectioning of
preparations (preserving gingiva), and articulator interface.
3Shape – leading impression scanning technologies
3Shape’s patented adaptive scanning technology, combined with the
scanner’s 3-axis motion and 2 cameras with reduced angle, facilitate
the unique impression scanning capability. Adaptive scanning
intelligently detects incomplete areas and automatically builds
adaptive scan sequences for capturing full object geometry.
productivity and flexibility are the key criteria. The Scanner comes
with “Dental System Premium”.
High speed scanning
The D710 is optimized for scanning both impression and gypsum models
and enables high throughput for both standard and advanced
indications.
Its that easy
These advanced dental scanners are so easy to use that extra staff
training is hardly required. Object fixation is quick, and a single
click in the software starts the scan.
Scanning the market’s most extensive range of dental indications
Antagonist model, Pre-preparation
Impression scanning (Add-on Module)
Model builder for impression and intraoral scans (Add-on Module)
Single coping
Bridge framework
Anatomical copings and framework
Full anatomical crown
Full anatomical bridge
Single wax up/ Wax up bridge
Inlay / Onlay / Inlay bridge
Veneers
Over-press crowns and bridges
Post & core
Telescope
Customized abutments (Add-on Module)
Implant bars and bridges
Removable partial design (Add-on Module)
Orthodontics module (Add-on Module)
Multi-Die scanning
Scan Indication Fixtures
3Shape has designed special accessories for your scanners to ensure
fast, problem-free, and precise scans with high quality digital data
for even the most complex indication types.
The impression fixture - Enables automatic alignment of upper and
lower when scanning triple-tray impressions. The impression is fixed
in a permenant position in the flippable holder. The scanner and
software can recreate the precise upper and lower relationship in the
digital model.
The wax-up fixture - enables scanning of wax-ups and bits from all
angles and sides. The wax-up is suspended in wires that will be
invisible in the scan result.
Two-cast fixture - enables users to firmly set 2 models, preparation
and antagonist, in occlusion so they do not move during scanning. The
Two-cast fixture functions like a clamp making it easy to set while
holding the models in occlusion.
Jumpstart the digital design process
Impression scanning, including intra oral, is storming ahead in
today’s dental arena and represents a technology that must be
considered when investing in a new scanner. Gypsym-only scanners may
not represent the most future-secure choice. 3Shape’s 3D scanners can
scan both gypsym models and impressions with fast adaptive impression
scanning, at times below 2 minutes.
Impression scanning reduces turnaround time
Direct scanning of silicone and alginate impressions enables labs to
start CAD design immediately and manufacture model, coping and crown
in parallel.
Enhancing accuracy with direct scanning of impressions
Impression scanning eliminates inaccuracies that can occur when
producing a plaster model from a physical impression.
Impression scan to virtual model
Turn the impression scan to a virtual model by applying tools for
articulation, trimming of scan, base creation, sectioning of
preparations (preserving gingiva), and articulator interface.
3Shape – leading impression scanning technologies
3Shape’s patented adaptive scanning technology, combined with the
scanner’s 3-axis motion and 2 cameras with reduced angle, facilitate
the unique impression scanning capability. Adaptive scanning
intelligently detects incomplete areas and automatically builds
adaptive scan sequences for capturing full object geometry.
